LYKM1224 Four Color Printer Slotter Die Cutter Machine with Stacker
Max printing area(mm)
Max.depth of slotting(mm)
Printing plate thickness（mm）
Layers of cardboard
Cut corner deepness（mm）
Die cutting precision(mm)
1.it adopts chain-paper feeding.
2.adopting QT400 Ductile iron gear driving
3.rockery interval adjustment device avoids central deviation of upper and lower knife rolls led by conventional adjustment,thus ensure balance operation rolls and clear print without double shadow.
4.auto cycling ink-feed system ,roller lifted pneumatic and separate rotating.
5.all the axles of roller must be chrome –plating in order to increase the hardness
6.printing and grooving electric phase adjusting mechanism adopt planet type gear structure (it can be adjusted 360 degree while revolving and stopping)
7.electrically separation and pneumatic locking
8.module design ,any combination of multicolor printing unit
9.auto count device to show right production volume.
1.High precision dynamic balance reticulate roller,fine printing effect.
2.The print phase is controlled by computer and electric digit with 360 degree adjustment.
3.The print phase roller could be adjusted horizontally with computer and electric digit control ranging from +10mm to -10mm
4.The interval of transmission roller,paper press roller,and glue roller adopt the self-lock structure.
5.Brush plate reset,printing ink inspection,fission brake location and water ink clean mechanism.
6.Has rapid handing plate mechanism.
1.slotting knives set can horizontal movement ,precision gear with smooth bar which plated with rigid chrome and ground surface ,movement flexible and accurate orientation of upper and lower cutting
2.the phase of slotting adjust by electric digital 360°,slot height by manual.
3.The press line wheel and slotting knives movement in a joint ,control by manual
4.The slotting and press line interval adjustment adopt the self-lock structure
Die cutting unit
1.the die cutter phase is controlled by computer and electric digit
2.The die cutting scraper could be adjusted horizontally with computer and electric digit control ranging from +5mm to -5mm
3.The glue roller cuts the trimming mechanism and the cushion could be used for many times and saved the use cost to a great deal
4.The cushion roller's mechanical, horizontal and cam facility from +35mm to -35mm could raise the service life of the cushion of the die-cutting
5.self-balancing device for the rubber roller can keep the carton board in the same size after itself being damaged.
1) The paper can then manually adjust automatically.
2) splicing speed and feed speed is synchronization, then the paper speed can be adjusted independently
3) The stack height of 1600 mm
4) bed units lifting strength chain drive.
5) The splicing platform equipped with anti-fall device to ensure operator safety.
6) take action paper hanging pressure plates stacked in cardboard to a certain height, then lift up out of cardboard board automatically.
7) plane wrinkle belt, to prevent the cardboard down.
8) received a separate paper to adjust the belt tension arm, without the belt length limit.